Exams › GATE › Technical
The type of weld represented by the shaded region in the figure is
- groove
- spot
- fillet
- plug
Correct answer: fillet
Solution
A fillet weld is used in lap, tee, and corner joints and appears as a triangular cross-section in the joint corner. The shaded region corresponds to this type of weld.
Related GATE Technical questions
- Using Taylor's tool life equation with exponent \(n=0.5\), if the cutting speed is reduced by 50%, the ratio of new tool life to original tool life is
- A grinding ratio of 200 implies that the
- In a casting process, a vertical channel through which molten metal flows downward from the pouring basin to the runner for reaching the mold cavity is called
- Which one of the following welding methods provides the highest heat flux $(W/mm^2)$?
- The length, width, and thickness of a steel sample are 400 mm, 40 mm, and 20 mm, respectively. Its thickness needs to be uniformly reduced by 2 mm in a single pass by using horizontal slab milling. The milling cutter (diameter: 100 mm, width: 50 mm) has 20 teeth and rotates at 1200 rpm. The feed per tooth is 0.05 mm. The feed direction is along the length of the sample. If the over-travel distance is the same as the approach distance, the approach distance and time taken to complete the required machining task are
- Metal removal in electric discharge machining takes place through
⚔️ Practice GATE Technical free + battle 1v1 →