Exams › GATE › Technical
In a casting process, a vertical channel through which molten metal flows downward from pouring basin to runner for reaching the mold cavity is called
- blister
- sprue
- riser
- pin hole
Correct answer: sprue
Solution
The sprue is the vertical channel that directs molten metal from the pouring basin to the runner, ensuring that the metal flows efficiently into the mold cavity during the casting process.
Related GATE Technical questions
- A flat-faced follower is driven using a circular eccentric cam rotating at a constant angular velocity ω. At time t = 0, the vertical position of the follower is y(0) = 0, and the system is in the configuration shown below. The vertical position of the follower face, y(t) is given by
- During a non-flow thermodynamic process (1-2) executed by a perfect gas, the heat interaction is equal to the work interaction (Q1-2 = W1-2) when the process is
- For a hydrodynamically and thermally fully developed laminar flow through a circular pipe of constant cross-section, the Nusselt number at constant wall heat flux (Nu_q) and that at constant wall temperature (Nu_T) are related as
- As per common design practice, the three types of hydraulic turbines, in descending order of flow rate, are
- A slender rod of length L, diameter d (L >> d) and thermal conductivity k1 is joined with another rod of identical dimensions, but of thermal conductivity k2, to form a composite cylindrical rod of length 2L. The heat transfer in radial direction and contact resistance are negligible. The effective thermal conductivity of the composite rod is
- Consider an ideal vapor compression refrigeration cycle. If the throttling process is replaced by an isentropic expansion process, keeping all the other processes unchanged, which one of the following statements is true for the modified cycle?
⚔️ Practice GATE Technical free + battle 1v1 →