Exams › GATE › Technical

Metal removal in electric discharge machining takes place through

1. ion displacement
2. melting and vaporization
3. corrosive reaction
4. plastic shear

Correct answer: melting and vaporization

Solution

In electric discharge machining, the removal of metal occurs due to the intense heat generated by electrical discharges, which melts and vaporizes the material at the workpiece surface.

Related GATE Technical questions

• The peak wavelength of radiation emitted by a black body at a temperature of 2000 K is 1.45 μm. If the peak wavelength of emitted radiation changes to 2.90 μm, then the temperature (in K) of the black body is
• Feed rate in slab milling operation is equal to
• The preferred option for holding an odd-shaped workpiece in a centre lathe is
• A local tyre distributor expects to sell approximately 9600 steel belted radial tyres next year. Annual carrying cost is Rs. 16 per tyre and ordering cost is Rs. 75. The economic order quantity of the tyres is
• In a cam-follower, the follower rises by h as the cam rotates by δ (radians) at constant angular velocity ω (radians/s). The follower is uniformly accelerating during the first half of the rise period and is uniformly decelerating in the latter half of the rise period. Assuming that the magnitudes of the acceleration and deceleration are same, the maximum velocity of the follower is
• A bimetallic cylindrical bar of cross sectional area 1 m² is made by bonding Steel (Young's modulus = 210 GPa) and Aluminium (Young's modulus = 70 GPa) as shown in the figure. To maintain tensile axial strain of magnitude 10⁻⁶ in Steel bar and compressive axial strain of magnitude 10⁻⁶ in Aluminium bar, the magnitude of the required force P (in kN) along the indicated direction is

⚔️ Practice GATE Technical free + battle 1v1 →