Exams › JEE Advanced › Physics
A liquid initially at 30 deg C is added very slowly into a calorimeter whose temperature is 110 deg C. The boiling point of the liquid is 80 deg C. The first 5 g of liquid poured in evaporates completely. After a further 80 g of the same liquid is added, the system settles at an equilibrium temperature of 50 deg C. Assuming no heat is lost to the surroundings, what is the ratio of the latent heat of the liquid to its specific heat (in deg C)?
- 180 deg C
- 270 deg C
- 200 deg C
- 240 deg C
Correct answer: 270 deg C
Solution
Let the calorimeter's total heat capacity be W (in cal/deg C, but it cancels) and s = specific heat of liquid, L = latent heat. Stage 1: calorimeter cools 110->80, and the 5 g first warms 30->80 then fully vaporises. Stage 2: calorimeter (plus the residue) cools 80->50 while 80 g liquid warms 30->50. Solving the two equations gives L/s = 270 deg C.
Related JEE Advanced Physics questions
- Match the temperature of a blackbody listed in Group-I to the corresponding statement in Group-II, and select the correct answer.
[Given: Wien’s constant = 2.9 × 10⁻³ m-K and hc/e = 1.24 × 10⁻⁶ V-m]
Group-I:
(P) 2000 K
(Q) 3000 K
(R) 5000 K
(S) 10000 K
Group-II:
(1) The peak wavelength of emitted radiation can cause photoelectron ejection from a metal with a work function of 4 eV.
(2) The peak wavelength of emitted radiation falls within the visible spectrum.
(3) The peak wavelength of emitted radiation produces the broadest central diffraction maximum in a single-slit setup.
(4) The energy radiated per unit area is one-sixteenth of that emitted by a blackbody at 6000 K.
(5) The peak wavelength of emitted radiation is suitable for imaging human bones.
- A composite wall is built from two layers A and B of equal thickness but made of different materials. The thermal conductivity of layer A is three times that of layer B. In steady-state conditions, the total temperature difference across the entire wall is 36 deg C. What is the temperature difference across layer A alone?
- A steel rail track of length 1 km was laid at an ambient temperature of 20 deg C with no gaps for thermal expansion. When the temperature rose to 25 deg C, the track buckled and formed an isosceles triangle shape. Given the coefficient of linear expansion of steel is 14 * 10⁻⁶ per K, find the height of the buckle in metres (to the nearest integer).
- Two rods are connected end to end. Rod 1 has length l and thermal conductivity 2K. Rod 2 has length 2l and thermal conductivity K. Both rods have the same cross-sectional area. What is the effective thermal conductivity of the combination?
- A steel container of water equivalent 10 g holds 20 g of ice at -30 deg C. Then 30 g of water at 80 deg C is poured into the container. Find the final equilibrium temperature. (Given: S_ice = 0.5 cal/(g*deg C), S_water = 1 cal/(g*deg C), L_ice = 80 cal/g)
- A continuous-flow calorimeter is used in two separate experiments to find the specific heat of a liquid. In the first trial, supplying 60 W raises the liquid temperature by 10 K. In the second trial, the power is doubled to 120 W, but the same 10 K rise is maintained by tripling the flow rate. Assuming heat loss to surroundings is the same in both trials, what is the power lost to the surroundings?
⚔️ Practice JEE Advanced Physics free + battle 1v1 →