Exams › GATE › Technical

Which one of the following is used to convert a rotational motion into a translational motion?

1. Bevel gears
2. Double helical gears
3. Worm gears
4. Rack and pinion gears

Correct answer: Rack and pinion gears

Solution

Rack and pinion gears are specifically designed to convert rotational motion from the pinion gear into linear motion along the rack, making them ideal for applications requiring this transformation.

Related GATE Technical questions

• Q.9 In vibration isolation, which one of the following statements is NOT correct regarding Transmissibility (T)?
• A thin plate of uniform thickness is subject to pressure as shown in the figure below. Under the assumption of plane stress, which one of the following is correct?
• For laminar forced convection over a flat plate, if the free stream velocity increases by a factor of 2, the average heat transfer coefficient
• A pure substance at 8 MPa and 400 °C is having a specific internal energy of 2864 kJ/kg and a specific volume of 0.03432 m³/kg. Its specific enthalpy (in kJ/kg) is ______
• A component can be produced by any of the four processes I, II, III and IV. The fixed cost and the variable cost for each of the processes are listed below. Process | Fixed cost (in Rs.) | Variable cost per piece (in Rs.) I | 20 | 3 II | 50 | 1 III | 40 | 2 IV | 10 | 4 The most economical process for producing a batch of 100 pieces is
• The flatness of a machine bed can be measured using

⚔️ Practice GATE Technical free + battle 1v1 →