Exams › GATE › Technical

The allowance provided in between a hole and a shaft is calculated from the difference between

1. lower limit of the shaft and the upper limit of the hole
2. upper limit of the shaft and the upper limit of the hole
3. upper limit of the shaft and the lower limit of the hole
4. lower limit of the shaft and the lower limit of the hole

Correct answer: upper limit of the shaft and the lower limit of the hole

Solution

The allowance is determined by the difference between the upper limit of the shaft and the lower limit of the hole, as this reflects the maximum clearance or fit between the two components, ensuring proper assembly and function.

Related GATE Technical questions

• The size distribution of the powder particles used in Powder Metallurgy process can be determined by
• In a CNC machine tool, the function of an interpolator is to generate
• The machining process that involves thermal energy is
• For a two-dimensional, incompressible flow having velocity components u and v in the x and y directions, respectively, the expression ∂(u²)/∂x + ∂(uv)/∂y can be simplified to
• Which of the following is responsible for eddy viscosity (or turbulent viscosity) in a turbulent boundary layer on a flat plate?
• The controlling force curves P, Q and R for a spring controlled governor are shown in the figure, where r1 and r2 are any two radii of rotation.

⚔️ Practice GATE Technical free + battle 1v1 →