Exams › GATE › Technical

The pressure coil of a dynamometer type wattmeter is

1. highly inductive
2. highly resistive
3. purely resistive
4. purely inductive

Correct answer: highly resistive

Solution

The pressure coil of a dynamometer type wattmeter is designed to measure voltage and is highly resistive to minimize the current drawn from the circuit, ensuring accurate voltage readings without significantly affecting the circuit's operation.

Related GATE Technical questions

• The measurement system shown in the figure uses three sub-systems in cascade whose gains are specified as G1, G2 and 1/G3. The relative small errors associated with each respective subsystem G1, G2 and G3 are ε1, ε2 and ε3. The error associated with the output is:
• The steady state error of a unity feedback linear system for a unit step input is 0.1. The steady state error of the same system, for a pulse input r(t) having a magnitude of 10 and a duration of one second, as shown in the figure is
• The three-dimensional state of stress at a point is given by σ = [[10, 0, 0],[0, 40, 0],[0, 0, 0]] MPa. The maximum shear stress at the point is
• A 2 m wide strip footing is founded at a depth of 1.5 m below the ground level in a homogeneous pure clay bed. The clay bed has unit cohesion of 40 kPa. Due to seasonal fluctuations of water table from peak summer to peak monsoon period, the net ultimate bearing capacity of the footing, as per Terzaghi’s theory, will
• Consider the statements P and Q. P: Soil particles formed by mechanical weathering, and close to their origin are generally subrounded. Q: A activity of the clay physically signifies its swell potential. Which one of the following options is CORRECT?
• The number of degrees of freedom for a natural open channel flow with a mobile bed is

⚔️ Practice GATE Technical free + battle 1v1 →