Exams › GATE › Technical

The softening point of bitumen is measured in terms of

1. distance
2. temperature

Correct answer: temperature

Solution

The softening point of bitumen is defined as the temperature at which it softens to a specified condition in a standard test. Hence, it is measured in terms of temperature, not distance.

Related GATE Technical questions

• A car is travelling at a speed of 60 km/h on a section of a national highway having a downward gradient of 2%. The driver suddenly observes a stopped vehicle on the car path at a distance of 130 m ahead and applies the brakes. If the brake efficiency is 60%, coefficient of friction is 0.7, driver's reaction time is 2.5 s, and acceleration due to gravity is 9.81 m/s², the distance required by the driver to bring the car to a safe stop lies in the range
• Which one of the following statements related to bitumen is false?
• As per IRC:37-2012, in order to control subgrade rutting in flexible pavements, the parameter to be considered is
• The initial concavity in the load-penetration curve of a CBR test is not due to
• A flexible pavement has the following class of loads during a particular hour of the day: i. 80 buses with 2 axles, each axle load being 40 kN ii. 160 trucks with 2 axles, with front and rear axle loads of 40 kN and 80 kN, respectively The equivalent standard axle load repetitions for this vehicle combination as per IRC:37-2012 would be
• Which of the following is equal to the stopping sight distance?

⚔️ Practice GATE Technical free + battle 1v1 →