Exams › JEE Main › Physics

A liquid-nitrogen vessel is built from a 1 cm thick thermocol sheet of thermal conductivity 0.025 J/m-°C-s. It holds liquid nitrogen at 80 K, with a total wall area of 0.80 m² in contact with the nitrogen. The surroundings are at 300 K. Find the rate of heat flow into the liquid nitrogen.

1. 400 W
2. 440 W
3. 480 W
4. 500 W

Correct answer: 440 W

Solution

Plugging into Q/t = K A ΔT / L gives 0.025*0.80*220/0.01 = 440 W.

Related JEE Main Physics questions

• A cube initially at 0°C is subjected to the same external pressure P on all its faces, causing it to be compressed. How much must its temperature be increased so that the cube regains its original size? The bulk modulus of the cube material is B and its coefficient of linear expansion is α.
• If λm represents the wavelength at which a black body emits radiation most strongly at temperature T K, then which relation is true?
• Which of the following statements about heat transfer is/are incorrect?
• A composite wall consists of two slabs, A and B, of equal thickness but made of different materials. Their thermal conductivities satisfy K_A = 3K_B. If the total temperature difference across the wall is 20°C, then in steady thermal equilibrium:
• An evacuated bulb contains a filament that is 10 cm long and 0.2 mm in diameter. If its emissivity is 0.2, determine the radiant power emitted by the filament at 2000 K. Take σ = 5.67 × 10⁻⁸ W/m² K⁴.
• A rectangular solid is raised in temperature from 0°C to 100°C. If its length increases by 0.10% over this interval, what is the corresponding percentage increase in its volume?

⚔️ Practice JEE Main Physics free + battle 1v1 →