Exams › JEE Advanced › General

A small roller of diameter 20 cm has an axle of diameter 10 cm (see figure below on the left). It is on a horizontal floor and a meter scale is positioned horizontally on its axle with one edge of the scale on top of the axle (see figure on the right). The scale is now pushed slowly on the axle so that it moves without slipping on the axle. and the roller starts rolling without slipping. After the roller has moved 50 cm, the position of the scale will look like (figures are schematic and not drawn to scale) CAREER POINT CAREER POINT , CP Tower, IPIA, Road No.1, Kota (Raj.), : 0744-6630500 | www.ecareerpoint.com Email: info@cpil.in Page # 3 Paper-1

1. x = 0 x = 50 cm
2. x = 0 x = 75 cm
3. x = 0 x = 25 cm
4. x = 0 x = 100 cm

Correct answer: x = 0 x = 75 cm

Related JEE Advanced General questions

• A particle of mass m is projected form the ground with an initial speed μ 0 at an angle α with the horizontal. At the highest point of its trajectory, it makes a completely inelastic collision with another identical particle, which was thrown vertically upward from the ground with the same initial speed u 0 . The angle that the composite system makes with the horizontal immediately after the collision is
• The image of an object, formed by a plano-convex lens at a distance of 8m behind the lens, is real and is one third the size of the object. The wavelength of light inside the lens is 2/3 times the wavelength in free space. The radius of the curved surface of the lens is -
• The diameter of a cylinder is measured using a Vernier callipers with no zero error. It is found that the zero of the Vernier scale lies between 5.10 cm and 5.15 cm of the main scale. The Vernier scale has 50 divisions equivalent to 2.45 cm. The 24 th division of the Vernier scale exactly coincides with one of the main scale divisions. The diameter of the cylinder is
• The work done on a particle of mass m by a force , K ⎥ ⎦ ⎤ ⎢ ⎣ ⎡ + + + j ˆ ) y x ( y i ˆ ) y x ( x 2 / 3 2 2 2 / 3 2 2 (K being a constant of appropriate dimensions), when the particle is taken from the point (a, 0) to the point (0, a) along a circular path of radius a about the origin in the x-y plane is
• One end of a horizontal thick copper wire of length 2L and radius 2R is welded to an end of another horizontal thin copper wire of length L and radius R. When the arrangement is stretched by applying forces at two ends, the ratio of the elongation in the thin wire to that in the thick wire is
• A ray of light travelling in the direction ( ) j ˆ 3 i ˆ 2 1 + is incident on a plane mirror. After reflection, it travels along the direction ( ) j ˆ 3 i ˆ 2 1 − . The angle of incidence is

⚔️ Practice JEE Advanced General free + battle 1v1 →