Exams › GATE › Technical
Instrument(s) required to synchronize an alternator to the grid is/are
- V oltmeter
- W attmeter
- Synchroscope
- Stroboscope
Correct answer: Synchroscope
Solution
A synchroscope is specifically designed to indicate the phase difference between the voltage of the alternator and the grid, allowing operators to synchronize the two systems effectively.
Related GATE Technical questions
- If the input x(t) and output y(t) of a system are related as y(t) = max(0, x(t)), then the system is
- Two discrete-time linear time-invariant systems have impulse responses h1[n] = δ[n−1] + δ[n+1] and h2[n] = δ[n−1] + δ[n+1], where δ[n] is the Kronecker delta. The overall system is
- Consider a power system consisting of N number of buses. Buses in this power system are categorized into slack bus, PV buses and PQ buses for load flow study. The number of PQ buses is N_L. The balanced Newton-Raphson method is used to carry out load flow study in polar form. H, S, M, and R are sub-matrices of the Jacobian matrix J as shown below:
[ΔP]
[ΔQ] = J [Δδ]
[ΔV], where J = [H S
M R]
The dimension of the sub-matrix M is
- Inductance is measured by
- In the Nyquist plot of the open-loop transfer function G(s)H(s) = (3s + 5)/(s - 1) corresponding to the feedback loop shown in the figure, the infinite semi-circular arc of the Nyquist contour in s-plane is mapped into a point at
- Consider a unity-gain negative feedback system consisting of the plant G(s) (given below) and a proportional-integral controller. Let the proportional gain and integral gain be 3 and 1, respectively. For a unit step reference input, the final values of the controller output and the plant output, respectively, are
G(s) = 1/(s - 1)
⚔️ Practice GATE Technical free + battle 1v1 →