Exams › GATE › Technical

The survey carried out to delineate natural features, such as hills, rivers, forests and man-made features, such as towns, villages, buildings, roads, transmission lines and canals is classified as

1. engineering survey
2. geological survey
3. land survey
4. topographic survey

Correct answer: topographic survey

Solution

A topographic survey specifically focuses on mapping the physical features of the land, including both natural and man-made elements, which is essential for understanding the terrain and planning developments.

Related GATE Technical questions

• Q.6 Match the information given in Group - I with those in Group - II. Group - I P Factor to decrease ultimate strength to design strength Q Factor to increase working load to ultimate load for design R Statical method of ultimate load analysis S Kinematical mechanism method of ultimate load analysis Group - II 1 Upper bound on ultimate load 2 Lower bound on ultimate load 3 Material partial safety factor 4 Load factor
• For a saturated cohesive soil, a triaxial test yields the angle of internal friction (φ) as zero. The conducted test is
• The action of negative skin friction on the pile is to
• A long slope is formed in a soil with shear strength parameters: c' = 0 and φ' = 34°. A firm stratum lies below the slope and it is assumed that the water table is occasionally rise to the surface, with seepage taking place parallel to the slope. Use γsat = 18 kN/m³ and γw = 10 kN/m³. The maximum slope angle (in degrees) to ensure a factor of safety of 1.5, assuming a potential failure surface parallel to the slope, would be
• A conventional flow duration curve is a plot between
• In reservoirs with an uncontrolled spillway, the peak of the plotted outflow hydrograph

⚔️ Practice GATE Technical free + battle 1v1 →