Exams › GATE › Technical

In the rigid-jointed frame shown in the figure, the distribution factor of the member AD is closest to

1. 0.254
2. 0.267
3. 0.398
4. 0.421

Correct answer: 0.267

Solution

The distribution factor for a member in a rigid-jointed frame is calculated based on the relative stiffness of that member compared to the total stiffness of the joint. In this case, the value of 0.267 indicates that member AD has a significant proportion of the joint's stiffness, reflecting its contribution to the overall structural behavior.

Related GATE Technical questions

• Identify the FALSE statement from the following options:
• The results of a consolidated drained triaxial test on a normally consolidated clay are shown in the figure. The angle of internal friction is
• To derive the total flood hydrograph at a catchment outlet from an isolated storm, the order in which the following methods are applied, from the first method to the last method, is P. Obtaining the hyetograph Q. Addition of baseflow R. Estimation of initial and infiltration losses S. Application of unit hydrograph
• A hydrocarbon (C_nHₘ) is burnt in air (O₂ + 3.78N₂). The stoichiometric fuel to air mass ratio for this process is Note: Atomic Wt. C (12), H (1) Effective Molecular Wt. Air (28.8) Ignore any conversion of N₂ in air to the oxides of nitrogen (NOₓ)
• All the vehicles that come during a particular peak hour come during a 10-minute period within this hour. The 15-minute peak hour factor for this peak hour is
• In the context of testing bitumen, which one of the following statements is FALSE:

⚔️ Practice GATE Technical free + battle 1v1 →